A). If there are many chandelier lamp, in accordance for the design drawings and set up location. Ceiling as steel keel gypsum board fireproof materials when opening direct set up of lamps, wooden structure ceiling should in turn over the light hole for fire insulation

B). Wall lamp, floor lamp, bedside lamp set up while in the lamp holder bottom opening height through the ground 1800mm, 300mm, 400mm

C). The lamp, lamp energy provide socket application. 2400mm the following metal shell must be well grounded during the safety of six lighting lamps need to be individually put in switches, mixed lamps may be grouped under control, in accordance to your need to install a dual manage switch.

D). Bulb capacity is reduced than 100W, obtainable plastic cap, 100W and moisture-proof closed sort porcelain lamp lamp

E). The lamp is grounded during the protection of the lamp. The lamp is always to be grounded and also the washer and spring washer are pressed.

F). All sorts of lamps and lanterns when installed during the flammable parts, must be well ventilated and well prepared for fire heat insulation

G). When the fluorescent lamp (fluorescent lamp) is dark, the equipment shall be set up inside the place for being maintained and maintained.

H). Ordinary ceiling lamp with soft conductor and its suspension, apply only for the fat on the lamp below 1kg, better than 1kg lamps should be the chain

I). Light steel keel ceiling mounted luminaire, can not make the light steel keel load, where the fat of the lamp in lower than 3kg who should be put in around the most important keel, 3kg and 3kg must be pre buried iron piece is fixed.