Get rid of the screws or publish connecting the light bulb socket. You’ll find commonly two or 3 screws holding the fixture itself to your bracket. Lower the fixture down, exposing the wire connections. When the fixture is down, use your hands or pliers to undo the wire nuts.

Wire nuts will be the plastic cone-looking pieces covering the ends of where the wires come with each other, connecting the black and white wires coming from the fixture for the wires coming through the ceiling. There might also be a ground wire in the fixture connected for the metal in the junction box during the ceiling by a screw.

Connect the wires to the new fixture. The wires need to be reattached during the exact same destinations because the outdated fixture, ordinarily white to white, black to black, and ground (bare copper) on the metal junction box. Neutral wire-usually white-should be connected to neutral wire. Twist the wires two or 3 times together clockwise, or the same course you turn the wire nuts.

You may use either the outdated wire nuts or the new ones provided with the fixture. To work with the wire nut, area the stripped ends of each wire following to each other, with their points dealing with exactly the same path. Then area the wire nut in excess of the ends and twist clockwise right up until the wires are secured within the wire nut.

Use pliers to twist the ends in the wires collectively prior to striving to screw the wire nut on. This can be especially useful for houses with smaller gauge (thicker) wires.Don’t be intimidated. With the electrical power off, the wires are harmless, and every thing is color coded (black and white, or, outside the US, brown and black.).Constantly stick to the guidelines (if any) provided with all the fixture.Normally use the new hardware (if any) provided with the fixture.